Lexicon RV-9 AV Receiver
An audiophile-grade 24-bit / 192 kHz DAC, Dirac room equalization, exceptional dynamics and low distortion ensure pristine sound for music and movies. The …
Conduct a cost simulation and apply for a Findomestic financing
An audiophile-grade 24-bit / 192 kHz DAC, Dirac room equalization, exceptional dynamics and low distortion ensure pristine sound for music and movies. Harman’s proprietary Logic 7 Immersion ™ mixer allows content to envelop the listener with rich, natural three-dimensional sound. Flexible configuration, Spotify Connect and a Zone 2 with audio, 4K video, IR control, triggers and power option make the RV-9 an excellent choice for a wide range of applications.
Highlights of the RV-9 Lexicon
-
Logic7 Natural Audio Immersion Upmixer
-
Dolby Atmos and DTS: X with 11.1 decoding and 7.2.4 outputs
-
IMAX Enhanced
-
DTS Virtual: X
-
Dolby Vision compatible
-
4K (UHD) HDMI2.0a with HDCP2.2 in Main and Zone 2
-
7 HDMI inputs, 3 HDMI outputs, ARC compatible
-
Dirac Live® for room correction Lexicon
-
Spotify® Connect enabled
-
Cirrus Audiophile DAC CS42528
-
Class G power amplification.
-
Ethernet on the rear panel, RS232, Main and Z2 IR and triggers.
-
MusicLife iOS UPnP and free control app
-
Independent volume control of secondary outputs
General Specifications
- Continuous output power, per channel 8Ω / 4Ω
- 2 channels driven, 20Hz – 20kHz <0.02% THD 120 W / 200 W.
- 2 channels driven, 1kHz 0.2% THD 130 W / 210 W.
- 7 channels driven, 1kHz 0.2% THD 100 W / 180 W.
- Residual noise and hum (A-wtd) <0.15mV
- Mains voltage 110-120V or 220-240V, 50-60Hz
- Energy consumption (maximum) 1.5 kW (heat dissipation about 5200 BTU / hour)
- Power consumption (idle, typical) 100 W (heat dissipation about 340 BTU / hour)
- Power consumption (standby) <0.5W
- Dimensions W x D (including speaker terminals) x H (including feet) 433 x 425 x 171mm
- Weight (net) 16.7kg
- Weight (packed) 20.0kg
- Audio interface
- Preamplifier outputs
- Rated output level 1 V RMS
- Output impedance 560Ω
- THD + N (20Hz – 20kHz) -100 dB
- Audio output
- Headphone output
- Maximum output level in 32Ω 2Vrms.
- Output impedance <5Ω
- Audio input
- Stereo line inputs
- Maximum input 4.5 V rms
- Nominal sensitivity 1 V, 2 V, 4 V (user adjustable)
- Input impedance 47kΩ
- Signal to noise ratio (A-wtd ref 100W) normal / direct stereo 100dB / 120dB
- Frequency response 20Hz – 20kHz 0.1dB
Reviews
Clear filtersThere are no reviews yet.