The DJI AL1 Spotlight supports two modes: always on and strobe. It can clearly illuminate subjects even at a distance of 100 meters. [1] In addition, it can intelligently link with the stabilizer, following the camera’s movements to ensure that the illuminated area matches the camera’s view. It also offers a wide field of view illumination mode, which can illuminate a wider area when the wide-angle mode is active. The reflector and speaker can be used independently or together to suit the needs of multiple operating scenarios.
The reflector supports two modes: always on and strobe, for clear illumination of subjects. It also connects to the gimbal.
1. Tighten the screws to ensure secure installation. When installing on the aircraft for long-term use, use the provided Allen wrench to retighten the screws after installation.
2. Activate the reflector by following the app’s instructions after installation. If a firmware update is available, immediately upgrade to the latest version.
3. The performance of the DJI Matrice 4 series aircraft propulsion and vision system will be impaired after the reflector is mounted. Fly with caution.
4. DO NOT point the reflector directly at the human eye.
5. The reflector may get hot after prolonged use. Pay attention to the risks of burns.
Reflector × 1
Replacement screw × 2
Allen wrench × 1
Weight: 99 g（bracket included）
Approx. 91 g (excluding bracket)
95×164×30 mm (W×L×H, bracket included)
79×164×28 mm (W×L×H, excluding bracket)
Maximum power: 32 W
Illumination: 4.3±0.2 lux at 100 meters, 17±0.2 lux at 50 meters
Effective illumination angle: 23°(relative illumination 10%)
Effective illumination area: 1,300 square meters at 100 meters (10% relative illumination, normal mode)
2,200 square meters at 100 meters (10% relative illumination, wide field of view mode)
Modes: always on and strobe
Mechanical stabilizer range (tilt): -135° to 45°
Controllable range stabilizer (tilt): -90° to 35°
Maximum control speed (tilt): 120°/s
Stabilizer alignment accuracy: ±0.1°
Operating temperature: -4 °F to 122 °F (-20 °C to 50 °C)
Mounting method: quick release screws tightened by hand
Support for use on DJI Matrix 4 series aircraft.
Reviews
Clear filtersThere are no reviews yet.