DJI Matrix 4 Batteries Charging Hub (100W)

The DJI Matrice 4 Series Charging Hub is designed for use with the Matrice 4 Smart Flight Batteries. It is capable of charging up to four Smart Flight Batteries sequentially, from the one with the highest charge to the one with the lowest charge. The battery charging hub supports both Standard mode and Ready-to-Fly mode. Standard mode: each battery is recharged sequentially until it reaches 100%. Ready-to-Fly mode charges each battery to 90% in sequence, maintaining that level for rapid deployment.

Designed for Matrix 4 smart flight batteries, it can charge up to 4 batteries in sequence with high and low power levels.

1. The DJI 100W USB-C Adapter is needed when using the charging hub to charge smart flight batteries.

2. The charging hub is only compatible with the BPX345-6741-14.76 Smart Flight Battery. DO NOT use the charging hub with other types of batteries.

3. When in use, place the charging hub on a flat and stable surface. Make sure the device is properly insulated to prevent fire hazards.

4. DO NOT touch the metal terminals on the battery ports. If you notice dirt buildup on the battery case, wipe the terminals with a clean, dry cloth.

Charging Hub for Batteries × 1

Model: CHX345-100

Compatible with DJI 100W Portable Charger.

Compatible with battery model BPX345-6741-14.76

Operating temperature: 41 °F to 104 °F (5 °C to 40 °C)

Input: 5-20 V, 5 A max

DJI Series Matrix 4